Php de Mail adresi gerçekmi değilmi kontrolü – email adress validator

Php de Mail adresi gerçekmi değilmi kontrolü – email adress validator

<?php
/*
Copyright 2009 Dominic Sayers
[email protected]
http://www.dominicsayers.com

Version 1.7

This source file is subject to the Common Public Attribution License Version 1.0 (CPAL) license.
The license terms are available through the world-wide-web at http://www.opensource.org/licenses/cpal_1.0
*/

// PHPLint modules
/*.
require_module ‘standard’;
require_module ‘pcre’;
.*/
/*.boolean.*/ function is_email (/*.string.*/ $email, $checkDNS = false) {
// Check that $email is a valid address. Read the following RFCs to understand the constraints:
// (http://tools.ietf.org/html/rfc5322)
// (http://tools.ietf.org/html/rfc3696)
// (http://tools.ietf.org/html/rfc5321)
// (http://tools.ietf.org/html/rfc4291#section-2.2)
// (http://tools.ietf.org/html/rfc1123#section-2.1)

// the upper limit on address lengths should normally be considered to be 256
// (http://www.rfc-editor.org/errata_search.php?rfc=3696)
// NB I think John Klensin is misreading RFC 5321 and the the limit should actually be 254
// However, I will stick to the published number until it is changed.
//
// The maximum total length of a reverse-path or forward-path is 256
// characters (including the punctuation and element separators)
// (http://tools.ietf.org/html/rfc5321#section-4.5.3.1.3)
$emailLength = strlen($email);
if ($emailLength > 256) return false; // Too long

// Contemporary email addresses consist of a “local part” separated from
// a “domain part” (a fully-qualified domain name) by an at-sign (“@”).
// (http://tools.ietf.org/html/rfc3696#section-3)
$atIndex = strrpos($email,’@’);

if ($atIndex === false) return false; // No at-sign
if ($atIndex === 0) return false; // No local part
if ($atIndex === $emailLength) return false; // No domain part

// Sanitize comments
// – remove nested comments, quotes and dots in comments
// – remove parentheses and dots from quoted strings
$braceDepth = 0;
$inQuote = false;
$escapeThisChar = false;

for ($i = 0; $i < $emailLength; ++$i) {
$char = $email[$i];
$replaceChar = false;

if ($char === ‘\\’) {
$escapeThisChar = !$escapeThisChar; // Escape the next character?
} else {
switch ($char) {
case ‘(‘:
if ($escapeThisChar) {
$replaceChar = true;
} else {
if ($inQuote) {
$replaceChar = true;
} else {
if ($braceDepth++ > 0) $replaceChar = true; // Increment brace depth
}
}

break;
case ‘)’:
if ($escapeThisChar) {
$replaceChar = true;
} else {
if ($inQuote) {
$replaceChar = true;
} else {
if (–$braceDepth > 0) $replaceChar = true; // Decrement brace depth
if ($braceDepth < 0) $braceDepth = 0;
}
}

break;
case ‘”‘:
if ($escapeThisChar) {
$replaceChar = true;
} else {
if ($braceDepth === 0) {
$inQuote = !$inQuote; // Are we inside a quoted string?
} else {
$replaceChar = true;
}
}

break;
case ‘.’: // Dots don’t help us either
if ($escapeThisChar) {
$replaceChar = true;
} else {
if ($braceDepth > 0) $replaceChar = true;
}

break;
}

$escapeThisChar = false;
if ($replaceChar) $email[$i] = ‘x’; // Replace the offending character with something harmless
}
}

$localPart = substr($email, 0, $atIndex);
$domain = substr($email, $atIndex + 1);
$FWS = “(?:(?:(?:[ \\t]*(?:\\r\\n))?[ \\t]+)|(?:[ \\t]+(?:(?:\\r\\n)[ \\t]+)*))”; // Folding white space
// Let’s check the local part for RFC compliance…
//
// local-part = dot-atom / quoted-string / obs-local-part
// obs-local-part = word *(“.” word)
// (http://tools.ietf.org/html/rfc5322#section-3.4.1)
//
// Problem: need to distinguish between “first.last” and “first”.”last”
// (i.e. one element or two). And I suck at regexes.
$dotArray = /*. (array[int]string) .*/ preg_split(‘/\\.(?=(?:[^\\”]*\\”[^\\”]*\\”)*(?![^\\”]*\\”))/m’, $localPart);
$partLength = 0;

foreach ($dotArray as $element) {
// Remove any leading or trailing FWS
$element = preg_replace(“/^$FWS|$FWS\$/”, ”, $element);

// Then we need to remove all valid comments (i.e. those at the start or end of the element
$elementLength = strlen($element);

if ($element[0] === ‘(‘) {
$indexBrace = strpos($element, ‘)’);
if ($indexBrace !== false) {
if (preg_match(‘/(?<!\\\\)[\\(\\)]/’, substr($element, 1, $indexBrace – 1)) > 0) {
return false; // Illegal characters in comment
}
$element = substr($element, $indexBrace + 1, $elementLength – $indexBrace – 1);
$elementLength = strlen($element);
}
}

if ($element[$elementLength – 1] === ‘)’) {
$indexBrace = strrpos($element, ‘(‘);
if ($indexBrace !== false) {
if (preg_match(‘/(?<!\\\\)(?:[\\(\\)])/’, substr($element, $indexBrace + 1, $elementLength – $indexBrace – 2)) > 0) {
return false; // Illegal characters in comment
}
$element = substr($element, 0, $indexBrace);
$elementLength = strlen($element);
}
}

// Remove any leading or trailing FWS around the element (inside any comments)
$element = preg_replace(“/^$FWS|$FWS\$/”, ”, $element);

// What’s left counts towards the maximum length for this part
if ($partLength > 0) $partLength++; // for the dot
$partLength += strlen($element);

// Each dot-delimited component can be an atom or a quoted string
// (because of the obs-local-part provision)
if (preg_match(‘/^”(?:.)*”$/s’, $element) > 0) {
// Quoted-string tests:
//
// Remove any FWS
$element = preg_replace(“/(?<!\\\\)$FWS/”, ”, $element);
// My regex skillz aren’t up to distinguishing between \” \\” \\\” \\\\” etc.
// So remove all \\ from the string first…
$element = preg_replace(‘/\\\\\\\\/’, ‘ ‘, $element);
if (preg_match(‘/(?<!\\\\|^)[“\\r\\n\\x00](?!$)|\\\\”$|””/’, $element) > 0) return false; // “, CR, LF and NUL must be escaped, “” is too short
} else {
// Unquoted string tests:
//
// Period (“.”) may…appear, but may not be used to start or end the
// local part, nor may two or more consecutive periods appear.
// (http://tools.ietf.org/html/rfc3696#section-3)
//
// A zero-length element implies a period at the beginning or end of the
// local part, or two periods together. Either way it’s not allowed.
if ($element === ”) return false; // Dots in wrong place

// Any ASCII graphic (printing) character other than the
// at-sign (“@”), backslash, double quote, comma, or square brackets may
// appear without quoting. If any of that list of excluded characters
// are to appear, they must be quoted
// (http://tools.ietf.org/html/rfc3696#section-3)
//
// Any excluded characters? i.e. 0x00-0x20, (, ), <, >, [, ], :, ;, @, \, comma, period, “
if (preg_match(‘/[\\x00-\\x20\\(\\)<>\\[\\]:;@\\\\,\\.”]/’, $element) > 0) return false; // These characters must be in a quoted string
}
}

if ($partLength > 64) return false; // Local part must be 64 characters or less

// Now let’s check the domain part…

// The domain name can also be replaced by an IP address in square brackets
// (http://tools.ietf.org/html/rfc3696#section-3)
// (http://tools.ietf.org/html/rfc5321#section-4.1.3)
// (http://tools.ietf.org/html/rfc4291#section-2.2)
if (preg_match(‘/^\\[(.)+]$/’, $domain) === 1) {
// It’s an address-literal
$addressLiteral = substr($domain, 1, strlen($domain) – 2);
$matchesIP = array();

// Extract IPv4 part from the end of the address-literal (if there is one)
if (preg_match(‘/\\b(?:(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\\.){3}(?:25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$/’, $addressLiteral, $matchesIP) > 0) {
$index = strrpos($addressLiteral, $matchesIP[0]);

if ($index === 0) {
// Nothing there except a valid IPv4 address, so…
return true;
} else {
// Assume it’s an attempt at a mixed address (IPv6 + IPv4)
if ($addressLiteral[$index – 1] !== ‘:’) return false; // Character preceding IPv4 address must be ‘:’
if (substr($addressLiteral, 0, 5) !== ‘IPv6:’) return false; // RFC5321 section 4.1.3

$IPv6 = substr($addressLiteral, 5, ($index ===7) ? 2 : $index – 6);
$groupMax = 6;
}
} else {
// It must be an attempt at pure IPv6
if (substr($addressLiteral, 0, 5) !== ‘IPv6:’) return false; // RFC5321 section 4.1.3
$IPv6 = substr($addressLiteral, 5);
$groupMax = 8;
}

$groupCount = preg_match_all(‘/^[0-9a-fA-F]{0,4}|\\:[0-9a-fA-F]{0,4}|(.)/’, $IPv6, $matchesIP);
$index = strpos($IPv6,’::’);

if ($index === false) {
// We need exactly the right number of groups
if ($groupCount !== $groupMax) return false; // RFC5321 section 4.1.3
} else {
if ($index !== strrpos($IPv6,’::’)) return false; // More than one ‘::’
$groupMax = ($index === 0 || $index === (strlen($IPv6) – 2)) ? $groupMax : $groupMax – 1;
if ($groupCount > $groupMax) return false; // Too many IPv6 groups in address
}

// Check for unmatched characters
array_multisort($matchesIP[1], SORT_DESC);
if ($matchesIP[1][0] !== ”) return false; // Illegal characters in address

// It’s a valid IPv6 address, so…
return true;
} else {
// It’s a domain name…

// The syntax of a legal Internet host name was specified in RFC-952
// One aspect of host name syntax is hereby changed: the
// restriction on the first character is relaxed to allow either a
// letter or a digit.
// (http://tools.ietf.org/html/rfc1123#section-2.1)
//
// NB RFC 1123 updates RFC 1035, but this is not currently apparent from reading RFC 1035.
//
// Most common applications, including email and the Web, will generally not
// permit…escaped strings
// (http://tools.ietf.org/html/rfc3696#section-2)
//
// the better strategy has now become to make the “at least one period” test,
// to verify LDH conformance (including verification that the apparent TLD name
// is not all-numeric)
// (http://tools.ietf.org/html/rfc3696#section-2)
//
// Characters outside the set of alphabetic characters, digits, and hyphen MUST NOT appear in domain name
// labels for SMTP clients or servers
// (http://tools.ietf.org/html/rfc5321#section-4.1.2)
//
// RFC5321 precludes the use of a trailing dot in a domain name for SMTP purposes
// (http://tools.ietf.org/html/rfc5321#section-4.1.2)
$dotArray = /*. (array[int]string) .*/ preg_split(‘/\\.(?=(?:[^\\”]*\\”[^\\”]*\\”)*(?![^\\”]*\\”))/m’, $domain);
$partLength = 0;

if (count($dotArray) === 1) return false; // Mail host can’t be a TLD

foreach ($dotArray as $element) {
// Remove any leading or trailing FWS
$element = preg_replace(“/^$FWS|$FWS\$/”, ”, $element);

// Then we need to remove all valid comments (i.e. those at the start or end of the element
$elementLength = strlen($element);

if ($element[0] === ‘(‘) {
$indexBrace = strpos($element, ‘)’);
if ($indexBrace !== false) {
if (preg_match(‘/(?<!\\\\)[\\(\\)]/’, substr($element, 1, $indexBrace – 1)) > 0) {
return false; // Illegal characters in comment
}
$element = substr($element, $indexBrace + 1, $elementLength – $indexBrace – 1);
$elementLength = strlen($element);
}
}

if ($element[$elementLength – 1] === ‘)’) {
$indexBrace = strrpos($element, ‘(‘);
if ($indexBrace !== false) {
if (preg_match(‘/(?<!\\\\)(?:[\\(\\)])/’, substr($element, $indexBrace + 1, $elementLength – $indexBrace – 2)) > 0) {
return false; // Illegal characters in comment
}
$element = substr($element, 0, $indexBrace);
$elementLength = strlen($element);
}
}

// Remove any leading or trailing FWS around the element (inside any comments)
$element = preg_replace(“/^$FWS|$FWS\$/”, ”, $element);

// What’s left counts towards the maximum length for this part
if ($partLength > 0) $partLength++; // for the dot
$partLength += strlen($element);

// The DNS defines domain name syntax very generally — a
// string of labels each containing up to 63 8-bit octets,
// separated by dots, and with a maximum total of 255
// octets.
// (http://tools.ietf.org/html/rfc1123#section-6.1.3.5)
if ($elementLength > 63) return false; // Label must be 63 characters or less

// Each dot-delimited component must be atext
// A zero-length element implies a period at the beginning or end of the
// local part, or two periods together. Either way it’s not allowed.
if ($elementLength === 0) return false; // Dots in wrong place

// Any ASCII graphic (printing) character other than the
// at-sign (“@”), backslash, double quote, comma, or square brackets may
// appear without quoting. If any of that list of excluded characters
// are to appear, they must be quoted
// (http://tools.ietf.org/html/rfc3696#section-3)
//
// If the hyphen is used, it is not permitted to appear at
// either the beginning or end of a label.
// (http://tools.ietf.org/html/rfc3696#section-2)
//
// Any excluded characters? i.e. 0x00-0x20, (, ), <, >, [, ], :, ;, @, \, comma, period, “
if (preg_match(‘/[\\x00-\\x20\\(\\)<>\\[\\]:;@\\\\,\\.”]|^-|-$/’, $element) > 0) {
return false;
}
}

if ($partLength > 255) return false; // Local part must be 64 characters or less

if (preg_match(‘/^[0-9]+$/’, $element) > 0) return false; // TLD can’t be all-numeric

// Check DNS?
if ($checkDNS && function_exists(‘checkdnsrr’)) {
if (!(checkdnsrr($domain, ‘A’) || checkdnsrr($domain, ‘MX’))) {
return false; // Domain doesn’t actually exist
}
}
}

// Eliminate all other factors, and the one which remains must be the truth.
// (Sherlock Holmes, The Sign of Four)
return true;
}
?>